• Teltonika NTP001 – Stratum 1 GNSS NTP Time Server

    Code: NTP001000000
    Barcode: 4779051843275

    Stratum 1 GNSS NTP time server for synchronising network devices without relying on Internet time sources. NTPv4, Ethernet, RS232/RS485 and configurable I/O in a compact industrial housing.

    NTP001000000: standard package with 16-pin connector. Power supply and GNSS antenna are sold separately.

  • One time reference for your network

    Teltonika NTP001

    Stratum 1 GNSS NTP time server

    Keep network devices on a shared time reference for consistent event logs, monitoring and automation. NTP001 receives time from GNSS satellites and distributes it over Ethernet or serial interfaces, independently of Internet time services.

    NTP001000000 · Standard package · Power supply and antenna not included

    Teltonika NTP001 GNSS NTP time server, angled view

    Stratum 1

    GNSS time source

    Synchronisation without Internet time services.

    NTPv4

    Over 300 requests/s

    Unicast, multicast and broadcast modes.

    Ethernet + serial

    RJ45, RS232 and RS485

    Integrate network and industrial equipment.

    −40 to +75 °C

    Industrial enclosure

    Compact aluminium housing with IP30 rating.

    Why choose NTP001?

    A local time source helps keep records from multiple devices aligned and supports installations with restricted Internet access.

    Keep a consistent time reference

    Synchronise compatible devices from one GNSS-based server so event logs and measurements can be compared more easily.

    Serve isolated networks

    Provide time without an Internet time server. GNSS reception remains necessary for satellite synchronisation.

    Connect serial equipment

    Distribute date and time through RS232 or RS485, alongside Ethernet NTP for network clients.

    Configure and monitor centrally

    Use RutOS WebUI, SSH, SNMP or Modbus TCP to configure the device and monitor its status.

    Plan the GNSS antenna location

    Choose a compatible GNSS antenna and a location with suitable satellite reception. Network conditions and client configuration affect the accuracy achieved at each device.

    NTP001 front panel with GNSS antenna connector and status LEDs

    GNSS connection and status LEDs

    Connect the external GNSS antenna through SMA and check satellite synchronisation using the status LEDs.

    NTP001 rear panel with Ethernet and industrial terminal block

    Ethernet and industrial terminal block

    RJ45 connects the local network. The 16-pin terminal block provides DC power, serial interfaces and I/O.

    Properties

    Time synchronisation

    Time reference GNSS-based Stratum 1 NTPv4 server
    Satellite systems GPS, GLONASS, Galileo and BeiDou
    NTP modes / capacity Unicast, multicast and broadcast · >300 requests per second
    Accuracy Ethernet NTP: ±1 ms overall; typical LAN synchronisation: 1–10 ms
    Serial time / Daytime Date over RS232/RS485; Daytime over TCP/UDP

    Interfaces and management

    Ethernet 1 × RJ45, 10/100 Mbps, auto MDI/MDIX
    Serial interfaces RS232: TX/RX/RTS/CTS · RS485: 2-wire or 4-wire
    I/O 3 configurable digital I/O and 1 analogue input, via 16-pin terminal block
    Digital signal limits Input: 0–6 V low, 8–30 V high; open-collector output: up to 30 V / 300 mA
    Antenna connector 1 × SMA for GNSS
    Industrial protocols Modbus TCP and RTU, server/client; Modbus MQTT Gateway
    Management / OS WebUI, SSH, SNMP, JSON-RPC, Modbus TCP · RutOS based on OpenWrt
    Security NTP authentication, access controls, certificate authentication and 802.1X client

    Power and installation

    DC supply 9–30 V DC; 2 power pins within the 16-pin terminal block
    Power consumption Idle <2 W · maximum <3.5 W
    Housing / protection Anodised aluminium · IP30
    Dimensions / net weight 83 × 25 × 82.6 mm (W × H × D) · 180 g
    Environment −40 to +75 °C; 10–90% relative humidity, non-condensing
    Mounting DIN rail, wall or flat surface with an additional mounting kit

    Ordering and shipping

    Order code / EAN NTP001000000 · 4779051843275
    Packaged weight 203.45 g
    Package dimensions 85 × 102 × 28 mm (L × W × H)

    Accuracy and capacity figures are manufacturer specifications. The ±1 ms server figure and typical 1–10 ms LAN synchronisation describe different measurements; client results depend on the installation.

    Set of equipment

    Teltonika NTP001 time server from the opposite angle

    NTP001000000 standard package

    • NTP001 GNSS NTP time server
    • 16-pin connector (2 × 8 contacts)
    • Quick Start Guide
    • Packaging box

    Power supply, GNSS antenna and mounting kit are not included. Select the required accessories for your installation.

    Documents

    Official Teltonika specifications, installation guidance and software resources.

    Frequently asked questions

    Does NTP001 need Internet access?

    Internet access is not required for GNSS-based time synchronisation. The server needs a compatible antenna, satellite reception and a connection to the devices receiving time.

    Are the power supply and antenna included?

    No. NTP001000000 includes the server, 16-pin connector, Quick Start Guide and box. The power supply, GNSS antenna and mounting kit are selected separately.

    What accuracy can I expect?

    Teltonika specifies ±1 ms overall Ethernet NTP accuracy and typical 1–10 ms LAN synchronisation. Actual client accuracy depends on network delay, reception and configuration.

    Can it synchronise equipment through RS232 or RS485?

    Yes. Date over Serial supports RS232 and RS485, in addition to NTP over Ethernet.

    Does it provide Wi-Fi or a mobile Internet connection?

    NTP001 is a dedicated time server with Ethernet and serial interfaces. It does not provide Wi-Fi or cellular Internet access.

    Can it be installed on a DIN rail?

    Yes, using a separately selected mounting kit. Wall and flat-surface installation options also require additional mounting accessories.