• Teltonika EBD070 CALYX – 5G RedCap HAT+ for Raspberry Pi 4/5

    Code: EBD070000000
    Barcode: 4779051845873

    5G RedCap HAT+ for Raspberry Pi 4 and 5 with LTE Cat 4 fallback, USB 2.0, GPIO modem control and two SMA antenna connectors. Compact cellular expansion for embedded IoT systems.

    EBD070000000: mounting kit, GPIO extender and USB accessory included. Raspberry Pi, antennas and power supply sold separately.

  • 5G RedCap connectivity for embedded IoT

    Teltonika EBD070

    CALYX 5G RedCap HAT+ for Raspberry Pi

    Add cellular connectivity to Raspberry Pi 4 or 5 projects with a compact HAT+ board. EBD070 combines 5G RedCap standalone connectivity, LTE Cat 4 fallback, USB 2.0 and GPIO modem control for connected embedded applications.

    EBD070000000 · Global version · Standard package without PSU

    Teltonika EBD070 CALYX 5G RedCap HAT+ board, angled view

    5G RedCap

    Standalone networks

    3GPP Release 17 cellular technology.

    LTE Cat 4

    4G fallback

    Additional connectivity where compatible LTE is available.

    2 × SMA

    Cellular antennas

    Connect antennas suited to the installation.

    Pi 4 / Pi 5

    HAT+ integration

    USB 2.0 and GPIO modem control.

    Why choose EBD070?

    A practical cellular expansion board for integrators and developers connecting Raspberry Pi systems beyond local Wi-Fi or Ethernet.

    Connect embedded projects over 5G RedCap

    RedCap brings 5G standalone connectivity to embedded IoT applications. Confirm that your operator supports RedCap on the required bands at the deployment location.

    Keep LTE as an additional connection option

    The integrated modem also supports LTE Cat 4. Your project can use compatible 4G networks when 5G RedCap service is unavailable.

    Build a compact Raspberry Pi assembly

    The HAT+ format mounts directly onto Raspberry Pi 4 or 5. Included fasteners and the 40-pin GPIO extender simplify board integration.

    Control the modem from your host

    GPIO provides on/off, wake and reset control, while USB 2.0 carries the data connection. PCM audio support is available for suitable integrations.

    Plan the complete system

    Use with a Raspberry Pi 4 or 5, compatible cellular antennas, a nano-SIM with a data plan and suitable power. Check RedCap network support and configure the host drivers and operator APN.

    EBD070 CALYX side profile showing the 40-pin GPIO header

    Compact board-to-board integration

    The 40-pin header and mounting points support a tidy Raspberry Pi assembly.

    EBD070 CALYX side profile and USB Type-C interface

    Accessible hardware interfaces

    USB Type-C and GPIO connections support data transfer and host-controlled modem operation.

    Properties

    Cellular connectivity

    Mobile technology 5G Sub-6 GHz RedCap SA · 3GPP Release 17
    5G NR SA bands n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n30, n38, n40, n41, n48, n66, n70, n71, n77, n78, n79
    LTE bands FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B30, B66, B70, B71 · TDD: B34, B38, B39, B40, B41, B42, B43, B48
    Fallback 4G LTE Cat 4
    5G data rate Up to 223 Mbps down / 123 Mbps up
    LTE data rate Up to 195 Mbps down / 105 Mbps up, as listed by Teltonika
    SIM / antenna connectors 1 × nano-SIM (4FF), push-pull · 2 × SMA

    Host integration

    Compatible host Raspberry Pi 4 and Raspberry Pi 5
    Form factor Embedded cellular HAT+ expansion board
    Data interface USB 2.0 via USB Type-C
    GPIO header 40-pin · modem on/off, wake and reset
    GPIO logic 3.3 V logic levels; follow the official pinout
    Audio interface PCM audio support
    Software setup Host configuration and operator APN required; see Quick Start Guide

    Power & installation

    USB power 5 V DC
    Header supply 5 V and 3.3 V through the 40-pin header
    Mounting Supplied fasteners and GPIO header extender
    Dimensions (W × H × D) 56 × 23.11 × 95.48 mm
    Operating temperature −40 to +75 °C

    Ordering & shipping

    Order code / MPN EBD070000000
    Manufacturer Teltonika Networks
    EAN 4779051845873
    Packaged weight 157.544 g
    Package dimensions (L × W × H) 85 × 102 × 28 mm

    Speeds are theoretical modem maxima specified by Teltonika. Actual throughput and coverage depend on the operator, antennas, signal, host and configuration. The complete system must meet the operating limits of all components.

    Set of equipment

    Teltonika EBD070 CALYX 5G RedCap board, reverse angled view

    Standard package · EBD070000000

    • CALYX EBD070 5G RedCap HAT+ board
    • Fasteners kit
    • 40-pin GPIO header extender
    • USB Type-C to USB Type-A accessory
    • Quick Start Guide
    • Packaging box

    Raspberry Pi, cellular antennas, SIM/data service and power supply are not included. Select accessories suitable for your installation.

    Documents

    Official Teltonika resources for wiring, installation and host configuration.

    Frequently asked questions

    Is EBD070 a complete router?

    No. EBD070 is a cellular HAT+ expansion board for a Raspberry Pi host. The Raspberry Pi, host software and suitable accessories complete the system.

    Which Raspberry Pi models are supported?

    Teltonika specifies Raspberry Pi 4 and Raspberry Pi 5. Follow the official mounting and GPIO instructions for the selected host.

    Are antennas and a power supply included?

    No. EBD070000000 includes the board, fasteners, GPIO header extender, USB accessory, guide and box. Cellular antennas, power supply and Raspberry Pi are supplied separately.

    How is EBD070 configured?

    Use the Raspberry Pi host and Teltonika's Quick Start Guide to install the required drivers, configure the mobile operator APN and establish the USB data connection. AT-command documentation is available in the manual.

    Does EBD070 support 5G NSA?

    The EBD070 variant is specified for 5G RedCap standalone (SA) networks and LTE Cat 4. It is not the full 5G SA/NSA EBD050 model. Check operator support for RedCap before deployment.

    Will it work with my mobile operator?

    Check supported frequency bands, local coverage and the operator's support for 5G RedCap SA or LTE. An active nano-SIM, data plan, correct APN and suitable antennas are required.