Teltonika DAP140 – Industrial Wi-Fi Access Point
Code: DAP140000000Industrial Wi-Fi 4 access point with mesh, Fast Roaming and 2 × Ethernet ports. Connect up to 50 devices and mount directly on a DIN rail.
DAP140000000: Wi-Fi antenna and 3-pin power connector included. Power supply sold separately.
-
Wi-Fi 4
Mesh & Fast Roaming
Flexible coverage across compatible access points.
50 connections
Multi-device access
Connect wireless terminals and IoT equipment.
2 × Ethernet
10/100 Mbps
Integrate with your existing wired network.
DIN rail
Industrial installation
Built-in bracket and 9–30 V DC input.
Why choose DAP140?
A practical choice when industrial equipment needs managed Wi-Fi in a compact, cabinet-ready format.
Expand coverage with mesh
802.11s mesh helps extend wireless coverage. Fast Roaming with 802.11r/k/v supports transitions between access points when clients and network settings are compatible.
Fit neatly into the installation
The integrated DIN rail bracket and 25 mm housing height simplify cabinet integration. A magnetic Wi-Fi antenna is included for flexible antenna placement.
Use the available power infrastructure
Supply 9–30 V DC through the 3-pin terminal or compatible passive PoE on LAN2. Maximum power consumption is below 2 W.
Manage the network remotely
RutOS provides VLANs, firewall controls and VPN options. Teltonika RMS supports remote monitoring and administration across deployed devices.
Designed for industrial Wi-FiWell suited to connecting service terminals, sensors and other network devices in automation and monitoring installations. An upstream network connection is required for internet access.

Wired integration, wireless access
Two Ethernet ports and an RP-SMA antenna connector keep network connections accessible.

Built for DIN rail installation
A low-profile aluminium enclosure with an integrated mounting bracket.
Properties
Wireless & connectivity
Wireless standard Wi-Fi 4 · IEEE 802.11b/g/n Operating modes Access point, station, mesh (802.11s), Multi AP Roaming 802.11r Fast Roaming, 802.11k and 802.11v Connected clients Up to 50 simultaneous Wi-Fi connections Ethernet 2 × RJ45 LAN, 10/100 Mbps, auto MDI/MDIX Antenna connector 1 × RP-SMA for Wi-Fi Security & management
Wireless security WPA2/WPA3 Personal and Enterprise support; client isolation Network separation Port-based and tag-based VLANs VPN options WireGuard, OpenVPN, IPsec and additional RutOS VPN services Management WebUI, SSH, SNMP, TR-069 and Teltonika RMS Operating system RutOS, based on OpenWrt Power & installation
DC power 9–30 V DC via 3-pin terminal Passive PoE input LAN2 only · 9–30 V DC · Mode B PoE compatibility Not compatible with IEEE 802.3af/at/bt; no PoE output Power consumption Below 1 W idle; below 2 W maximum Mounting Integrated DIN rail bracket; optional wall or flat-surface mounting kit Housing & identification
Enclosure Anodised aluminium · IP30 Operating temperature −40 to +75 °C Dimensions (W × H × D) 113.1 × 25 × 68.6 mm Packaged weight 248.7 g Package dimensions (L × W × H) 175 × 150 × 35 mm Manufacturer / MPN Teltonika Networks / DAP140000000 EAN 4779051843251 Connection performance depends on signal conditions, network configuration and client devices. Feature availability may depend on the installed RutOS version and additional software packages.
Set of equipment

Standard package · DAP140000000
- DAP140 industrial wireless access point
- 3-pin power connector
- 1 × magnetic Wi-Fi antenna with RP-SMA male connector
- Quick Start Guide
- Packaging box
Power supply and optional mounting accessories are not included. Use a suitable 9–30 V DC supply or compatible passive PoE source. RMS services may require a separate licence.
Documents
Official Teltonika documentation for installation, configuration and maintenance.
Frequently asked questions
Is DAP140 a mobile router?
No. DAP140 is an industrial wireless access point without a cellular modem or SIM slot. For internet access, connect it to an upstream network.
Does it support mesh and roaming?
Yes. It supports 802.11s mesh and 802.11r/k/v roaming features. Compatible client devices and appropriate configuration are required.
Can a standard PoE switch power it?
Only use a compatible 9–30 V passive PoE source connected to LAN2. DAP140 does not support IEEE 802.3af/at/bt PoE; applying an incompatible supply can damage the device.
Is a power adapter included?
No. DAP140000000 includes the access point, 3-pin connector, one magnetic Wi-Fi antenna, Quick Start Guide and box. The power supply is purchased separately.
Can it be installed outdoors?
Its IP30 enclosure is intended for protected installations. For outdoor deployment, provide a suitable enclosure and meet all temperature and moisture requirements.
Can DAP140 be managed remotely?
Yes. Teltonika RMS enables remote monitoring and management. RMS services may require a separate licence; local management is available through RutOS WebUI.
Manufacturer






