Teltonika TSW101 – Automotive Gigabit PoE+ Switch
Code: TSW101000000Automotive unmanaged switch with five Gigabit Ethernet ports, including four PoE+ ports.
9–30 V DC input, suitable for 12 V or 24 V vehicle supplies. Up to 60 W total PoE budget; without PSU.
-
TELTONIKA TSW101
PoE+ connectivity for vehicle installations
Connect and power compatible onboard devices using a Gigabit switch designed for 12 V or 24 V vehicle electrical systems.
5 × Gigabit Ethernet4 × PoE+ ports60 W total PSE9–30 V DC inputWhy choose this model?
Power from the vehicle
The switch supports 9–30 V DC input and PoE operation from 12 V or 24 V vehicle supplies.
Connect onboard equipment
Four PoE+ ports and one additional Gigabit port simplify Ethernet connections in vehicles.
TSW101000000 has a total PoE budget of 60 W, shared across four ports. Up to 30 W is available per port; the total limit still applies.Properties
Network & PoE
Ethernet 5 × RJ45, 10/100/1000 Mbps; auto MDI/MDIX. PoE output Ports 1–4; IEEE 802.3af/at, Alternative A. Up to 30 W per port and 60 W total at PSE. Switch type Unmanaged; non-blocking bandwidth 10 Gbps. Ethernet cable Maximum length 100 m. Power & installation
Power input 2-pin connector; 9–30 V DC, including 12 V or 24 V vehicle supplies. Consumption Idle 0.64 W; maximum 2.31 W without PoE loads; up to 62.3 W with PoE. Device 115 × 32 × 95 mm; 384 g; aluminium, IP30. Mounting & temperature −40 to +75 °C; DIN rail, wall and surface mounting with optional kits. Shipping package 175 × 150 × 35 mm; approximately 399 g. 

Set of equipment
TSW101000000
- TSW101 switch
- Quick Start Guide
- Packaging box
TSW101000000 standard package without PSU. Mounting hardware and installation cables are purchased separately.

Documentation
Frequently asked questions
Can it work from a 12 V or 24 V vehicle supply?
Yes. The specified input range is 9–30 V DC, including PoE operation.
Can all four ports deliver 30 W simultaneously?
No. The total shared PoE budget is 60 W, with up to 30 W per port.
Is a power supply included?
No. This package is intended for connection to a compatible external DC supply.
Does it require configuration?
No. The unmanaged switch operates on a plug-and-play basis.
Manufacturer









