• Teltonika TSW100 – 5-Port Gigabit PoE+ Switch

    Code: TSW100010040
    Barcode: 4779027312828

    Unmanaged industrial switch with five Gigabit Ethernet ports, including four PoE+ ports.

    Up to 30 W per PoE port and 120 W total at PSE. TSW100010040 without PSU.

  • TELTONIKA TSW100

    Gigabit data and PoE+ power together

    Connect high-bandwidth wired equipment and power compatible devices through four PoE+ ports in a rugged aluminium enclosure.

    TSW100 product view
    5 × Gigabit Ethernet4 × PoE+ ports120 W total PSEUnmanaged

    Why choose this model?

    Reduce cabling

    Four IEEE 802.3af/at ports carry Ethernet data and supply up to 30 W per compatible device.

    Expand Gigabit connectivity

    Five 10/100/1000 Mbps ports support simple plug-and-play network expansion.

    TSW100010040 is supplied without PSU. PoE requires 44–57 V DC; a PSU rated above 130 W is required to reach the full 120 W PoE budget.

    Properties

    Network & PoE

    Ethernet 5 × RJ45, 10/100/1000 Mbps; auto MDI/MDIX.
    PoE output Ports 1–4; IEEE 802.3af/at, Alternative A for TSW100010040. Up to 30 W per port and 120 W total at PSE.
    Switch type Unmanaged; non-blocking bandwidth 10 Gbps.
    Status Power LED and Ethernet status LEDs.

    Power & installation

    Power input 4-pin connector; 9–57 V DC according to the Quick Start Guide. PoE requires 44–57 V DC.
    Consumption Idle 2 W; maximum 9 W without PoE loads; up to 129 W with PoE.
    Device 115 × 32.2 × 101.2 mm; 350 g; aluminium, IP30.
    Mounting & temperature −40 to +75 °C; DIN rail, wall and surface mounting with optional mounting kits.
    Shipping package 175 × 150 × 35 mm; approximately 386 g.
    TSW100 front interfaces
    TSW100 rear interfaces

    Set of equipment

    TSW100010040

    • TSW100 switch
    • Quick Start Guide
    • Packaging box

    TSW100010040 package without PSU. Power supply, mounting kit and Ethernet cables are purchased separately.

    TSW100 side view

    Documentation

    Frequently asked questions

    Is the power supply included?

    No. This is the TSW100010040 version without PSU.

    How much PoE power is available?

    Up to 30 W per port and 120 W total at PSE, with a suitable 44–57 V DC PSU rated above 130 W.

    Can a 12 V supply power PoE devices?

    No. At lower input voltages the switch can transfer data, but PoE output requires at least 44 V DC.

    Does it require configuration?

    No. It is an unmanaged Gigabit switch.