• Teltonika TSF000 – Low-Profile 5-Port PoE+ Switch

    Code: TSF000000000
    Barcode: 4779051846979

    Compact unmanaged switch with five 10/100 Mbps Ethernet ports, four PoE+ outputs and a 120 W total PoE budget.

    TSF000000000 standard package without PSU. PoE output requires 44–57 V DC input.

  • TELTONIKA TSF000

    Power and connect devices in tight spaces

    A flat industrial Ethernet switch combines four PoE+ outputs with an integrated DIN rail bracket for compact control cabinets and device installations.

    TSF000 product view
    5 × 10/100 Mbps4 × PoE+120 W PoE budgetDIN rail bracket

    Why choose this model?

    Data and power over one cable

    Connect compatible PoE cameras, access points and other endpoints through four IEEE 802.3af/at ports.

    Fit compact installations

    The low-profile aluminium housing and integrated DIN rail bracket simplify installation where space is limited.

    PoE output requires 44–57 V DC input and a suitably rated power supply. The 120 W total PoE budget is subject to the available input power; the PSU is not included.

    Properties

    Network & PoE

    Ethernet 5 × RJ45, 10/100 Mbps; auto MDI/MDIX; unmanaged operation.
    PoE outputs Ports 1–4: IEEE 802.3af / 802.3at, Alternative A.
    PoE budget Up to 30 W per port and 120 W total at the power sourcing equipment (PSE).
    Configuration Plug-and-play switching; no managed switch configuration required.

    Power & installation

    DC input 7–57 V DC through a 3-pin connector. PoE output requires 44–57 V DC.
    Consumption Idle 1 W; maximum 1.5 W excluding PoE; maximum with PoE 121 W.
    Device 113 × 28 × 50 mm; 142 g; anodised aluminium, IP30.
    Mounting & environment Integrated DIN rail bracket; −40 to +75 °C.
    Shipping package 124.5 × 50.5 × 29 mm; approximately 150.7 g.
    TSF000 front interfaces
    TSF000 rear interfaces

    Set of equipment

    TSF000000000

    • TSF000 switch with integrated DIN rail bracket
    • 3-pin power connector
    • Quick Start Guide and packaging

    TSF000000000 standard package without PSU. Select a suitable DC supply for the intended PoE load. Ethernet cables are not included.

    TSF000 side view

    Documentation

    Frequently asked questions

    Does it supply PoE?

    Yes. Ports 1–4 supply IEEE 802.3af/at PoE, up to 30 W per port and 120 W total at PSE.

    Will PoE work with a 12 V supply?

    No. The switch itself accepts 7–57 V DC, but PoE output requires 44–57 V DC input.

    Is the PSU included?

    No. The package includes the 3-pin connector, but no mains power supply.

    Is this a managed or Gigabit switch?

    No. It is an unmanaged switch with five 10/100 Mbps ports.