Teltonika TRM282 – Global 4G USB-C / RS232 Modem
Code: TRM282AAAAA0Global LTE Cat 4 modem with USB-C, RS232, GNSS and digital input/output for industrial host equipment.
TRM282AAAAA0 standard package with two mobile antennas and USB-C cable; without PSU.
-
TELTONIKA TRM282
Global LTE for modern and serial equipment
Add cellular connectivity to compatible industrial devices using USB-C or RS232, with GNSS support for location-aware applications.
LTE Cat 4USB-C + RS232GNSSDigital I/OWhy choose this model?
Connect different generations of equipment
Use USB-C for compatible computers and embedded hosts, or RS232 for serial integration and AT control.
Support location applications
Built-in GNSS and a dedicated antenna connector allow location data to be integrated with suitable host software.
This is a host-controlled cellular modem. Check the operating system, drivers, operator bands and application compatibility. It does not provide Ethernet or Wi-Fi routing.Properties
Connectivity & integration
Mobile Telit LTE Cat 4, up to 150 Mbps download / 50 Mbps upload; 3G up to 42 / 5.76 Mbps. Interfaces USB Type-C for data, power and modem control; RS232 DB9 for serial data and AT commands. SIM & antennas 1 × Mini-SIM (2FF), 1.8/3 V; 2 × SMA mobile and 1 × SMA GNSS connectors. Positioning & I/O GNSS: GPS, GLONASS, BeiDou, Galileo and QZSS; digital input and output. Host software Windows Connection Manager or ModemManager on Linux; consult manufacturer downloads for compatible drivers. Power & installation
Power input 9–30 V DC through the 4-pin connector, or 5 V through USB-C. The USB host must provide 5 V / 0.9 A. Power consumption Idle below 0.4 W; maximum below 4 W. Device 83 × 25 × 85.8 mm; 171 g; anodised aluminium housing, IP30. Environment & mounting −40 to +65 °C; DIN rail, wall or flat-surface mounting with an additional kit. Shipping package 173 × 148 × 71 mm; approximately 370 g. 

Set of equipment
TRM282AAAAA0
- TRM282 modem
- 2 × swivel mobile antennas, SMA male
- USB Type-C cable, 0.8 m
- Hex key
- SIM adapter kit
- Quick Start Guide and packaging
Standard package without PSU. GNSS antenna, SIM card, mobile service and mounting kit are not included.

Documentation
Frequently asked questions
Is a mains power supply included?
No. TRM282AAAAA0 is the standard package without PSU. It includes a USB-C cable.
Is the GNSS antenna included?
No. The package includes two mobile antennas; a suitable GNSS antenna is purchased separately.
Can I connect serial equipment?
Yes, through the RS232 DB9 interface. The host application must support the required serial and AT-command integration.
Can it replace an Ethernet router?
It is designed as a USB-C/RS232 cellular modem. It has no Ethernet or Wi-Fi routing interface.
Manufacturer









