• Teltonika TRB236 Cat 4 – LTE 450 Industrial Gateway

    Code: TRB236000000
    Barcode: 4779051847068

    Industrial LTE Cat 4 gateway with 450 MHz support, dual SIM, Ethernet, RS232 and RS485. Built for remote utility monitoring and serial equipment integration.

    TRB236000000 standard package without power supply or mobile antenna.

  • TELTONIKA TRB236

    LTE 450 Cat 4 for industrial telemetry

    Connect field equipment and remote utility sites through LTE 450, serial interfaces and configurable inputs and outputs.

    Teltonika TRB236 industrial gateway
    LTE Cat 4 · 450 MHz
    Dual SIM
    RS232 & RS485
    Ethernet & I/O

    Why choose TRB236?

    Connect existing field equipment

    RS232, RS485, Modbus and other industrial protocols help bring controllers and meters into IP monitoring systems.

    Keep remote access available

    Dual SIM and connection monitoring support backup scenarios; VPNs and RMS provide remote access and management.

    Order code TRB236000000 is the LTE Cat 4 / 3G version. The standard package does not include a power supply or mobile antenna. Choose accessories and SIM service compatible with your LTE bands, including 450 MHz where used.

    Properties

    Connectivity & interfaces

    Mobile LTE Cat 4: up to 150 Mbps download / 50 Mbps upload; 3G fallback where available.
    LTE bands FDD B1/B2/B3/B4/B5/B7/B8/B20/B28/B31/B66/B72/B87; TDD B38/B40/B41.
    Dual SIM 2 × Mini-SIM (2FF) slots with configurable switching.
    Ethernet 1 × 10/100 Mbps RJ45.
    Serial interfaces RS232: TX, RX, RTS, CTS. RS485: 2- or 4-wire interface through the 16-pin terminal block.
    Inputs & outputs 3 configurable digital I/O pins and 1 analog input (0–30 V).

    Software & hardware

    Integration Modbus RTU/TCP, DNP3, DLMS/COSEM, BACnet, OPC UA and MQTT.
    Remote access RutOS, Teltonika RMS, WebUI, SSH and SMS; OpenVPN, IPsec and WireGuard.
    Processor & memory MediaTek MIPS 24KEc, 580 MHz; 128 MB RAM; 16 MB flash.

    Power & installation

    Power 9–57 V DC via terminal block; idle below 2 W, maximum below 5 W.
    Device 83 × 25 × 79.8 mm; 175 g; anodised aluminium housing, IP30.
    Environment & mounting −40 to +75 °C; DIN rail, wall or flat-surface mounting with an additional kit.
    Shipping package 85 × 102 × 28 mm; approximately 198 g.
    TRB236 front view
    TRB236 rear view

    Set of equipment

    • TRB236 Cat 4 gateway
    • 2 × 8-pin connector
    • Hex key
    • Quick Start Guide and packaging

    Power supply, mobile antenna, SIM cards, cables and mounting kit are not included.

    Teltonika TRB236 perspective view

    Documentation

    Frequently asked questions

    Which TRB236 version is this?

    TRB236000000 is the LTE Cat 4 / 3G version, with LTE download rates up to 150 Mbps. The Cat 1 version has a different order code and price.

    Does LTE 450 work with any SIM?

    No. Your operator or private network must support the selected LTE band and permit the SIM and device on that network.

    Are RS232 and RS485 available?

    Yes. Both serial interfaces are available through the 16-pin terminal block; RS485 supports 2- or 4-wire operation.

    Are power supply and antenna included?

    No. Select a suitable 9–57 V DC power supply and a mobile antenna covering the required frequency bands.