• Teltonika TAP200 – Wi-Fi 5 Access Point with PoE

    Code: TAP20000AC00

    Dual-band Wi-Fi 5 access point with MU-MIMO, a Gigabit Ethernet uplink and PoE input. Supports mesh, fast roaming and up to 100 simultaneous connections.

    Standard package TAP20000AC00 without PoE injector. Two years of RMS Management included.

  • TELTONIKA TAP200

    Dual-band Wi-Fi with a Gigabit uplink

    Extend wireless coverage in shops, offices and commercial spaces with Wi-Fi 5, PoE power and simple ceiling mounting.

    Teltonika TAP200 Wi-Fi access point
    2.4 & 5 GHz Wi-Fi 5
    Gigabit Ethernet + PoE
    Mesh & fast roaming
    2 years RMS Management

    Why choose TAP200?

    One cable for power and data

    Connect TAP200 to a compatible PoE switch or injector for straightforward installation.

    Consistent wireless coverage

    Mesh and roaming features help users move between access points; VLANs and client isolation separate traffic.

    Order code TAP20000AC00: standard package without PoE injector. Use a compatible 802.3af PoE power source and connect to an existing network.

    Properties

    Wireless & Ethernet

    Wi-Fi 802.11b/g/n/ac Wave 2, 2.4 and 5 GHz, MU-MIMO; up to 867 Mbps wireless link rate.
    Connections Up to 100 simultaneous wireless connections; practical capacity depends on traffic and radio conditions.
    Mesh & roaming 802.11s mesh; 802.11r fast roaming and 802.11k/v support.
    Ethernet 1 × 10/100/1000 Mbps RJ45 uplink with PoE input.

    Security & management

    Wireless security WPA2/WPA3, Enterprise authentication, Protected Management Frames and client isolation.
    Network separation Tagged VLANs and MAC access control.
    Management RutOS WebUI, SSH, JSON-RPC, FOTA and RMS; two years of RMS Management included.

    Hardware & power

    Processor & memory MediaTek dual-core 880 MHz; 256 MB DDR3 RAM and 16 MB SPI NOR flash.
    Power input IEEE 802.3af PoE Class 1, 44–57 V through RJ45.
    Power consumption Idle below 4 W; maximum below 5.5 W.

    Housing & installation

    Device 158 mm diameter × 30 mm height; 190 g.
    Housing UV-stabilised plastic, IP30; suitable for protected indoor installation.
    Environment −40 to +50 °C; 10–90% non-condensing humidity.
    Mounting Integrated bracket for ceiling mounting.
    Shipping package 160 × 160 × 31 mm; approximately 231 g.
    TAP200 front view
    TAP200 rear view

    Set of equipment

    • TAP200 access point
    • Quick Start Guide
    • Wi-Fi information sticker
    • Packaging box

    PoE injector and Ethernet cable are not included in this standard package. The built-in bracket supports ceiling mounting.

    Teltonika TAP200 perspective view

    Documentation

    Frequently asked questions

    Does TAP200 support 2.4 and 5 GHz?

    Yes. TAP200 supports dual-band Wi-Fi 5 with MU-MIMO and wireless link rates up to 867 Mbps. Actual throughput depends on conditions.

    Is the Ethernet port Gigabit?

    Yes. The RJ45 uplink supports 10/100/1000 Mbps and PoE input.

    Is a PoE injector included?

    No. TAP20000AC00 is the standard package without a PoE injector. Use a suitable 802.3af PoE switch or injector.

    Does TAP200 provide mobile internet?

    No. It is a wireless access point without a cellular modem. Connect it to an existing network for internet access.