• Teltonika TAP100 – Wi-Fi 4 Access Point with PoE

    Code: TAP100001000
    Barcode: 4779051840182

    Compact 2.4 GHz Wi-Fi 4 access point with PoE input, mesh and fast roaming. Supports up to 100 simultaneous connections through a 10/100 Mbps Ethernet uplink.

    Standard package TAP100001000 without PoE injector. Two years of RMS Management included.

  • TELTONIKA TAP100

    Simple Wi-Fi coverage with PoE

    Extend wireless coverage in offices, cafés and commercial spaces with a compact ceiling-mounted access point.

    Teltonika TAP100 Wi-Fi access point
    2.4 GHz Wi-Fi 4
    802.3af PoE input
    Mesh & fast roaming
    2 years RMS Management

    Why choose TAP100?

    One cable for power and data

    Connect TAP100 to a compatible PoE switch or injector for straightforward installation.

    Consistent wireless coverage

    Mesh and roaming features help users move between access points; VLANs and client isolation separate traffic.

    Order code TAP100001000: standard package without PoE injector. A compatible 802.3af PoE power source and an existing internet connection are required.

    Properties

    Wireless & Ethernet

    Wi-Fi 802.11b/g/n, 2.4 GHz; two internal antennas.
    Connections Up to 100 simultaneous wireless connections; practical capacity depends on traffic and radio conditions.
    Mesh & roaming 802.11s mesh; 802.11r fast roaming and 802.11k/v support.
    Ethernet 1 × 10/100 Mbps RJ45 uplink with PoE input.

    Security & management

    Wireless security WPA2/WPA3, Enterprise authentication, Protected Management Frames and client isolation.
    Network separation Tagged VLANs and MAC access control.
    Management RutOS WebUI, SSH, JSON-RPC, FOTA and RMS; two years of RMS Management included.

    Hardware & power

    Processor & memory MediaTek 580 MHz; 64 MB DDR2 RAM and 16 MB SPI flash.
    Power input IEEE 802.3af PoE Class 1, 44–57 V through RJ45.
    Power consumption Less than 2 W maximum.

    Housing & installation

    Device 158 mm diameter × 30 mm height; 190 g.
    Housing UV-stabilised plastic, IP30; suitable for protected indoor installation.
    Environment −40 to +75 °C; 10–90% non-condensing humidity.
    Mounting Integrated bracket for ceiling mounting.
    Shipping package 160 × 160 × 31 mm; approximately 231 g.
    TAP100 front view
    TAP100 rear view

    Set of equipment

    • TAP100 access point
    • Quick Start Guide
    • Wi-Fi information sticker
    • Packaging box

    PoE injector and Ethernet cable are not included in this standard package. The built-in bracket supports ceiling mounting.

    Teltonika TAP100 perspective view

    Documentation

    Frequently asked questions

    Does TAP100 support 5 GHz Wi-Fi?

    No. TAP100 operates at 2.4 GHz using Wi-Fi 4 (802.11b/g/n).

    Is the Ethernet port Gigabit?

    No. The RJ45 uplink supports 10/100 Mbps.

    How is TAP100 powered?

    Use an IEEE 802.3af PoE switch or injector. TAP100001000 does not include a PoE injector.

    Does it include mobile internet?

    No. TAP100 is an access point without a cellular modem. Connect it to an existing network for internet access.