• Teltonika SWM282 – 24-Port Managed PoE+ Switch

    Code: SWM282000200

    L2 managed switch with L3 features, 24 Gigabit PoE+ ports and four SFP slots. Up to 30 W per port within a shared 300 W PoE budget.

    Standard package SWM282000200 without power cord. Includes two years of RMS Management; PROFINET Class B is a separate order variant.

  • TELTONIKA SWM282

    24 PoE+ ports for connected devices

    Power and connect cameras, access points and industrial equipment from one managed switch with four fibre uplinks.

    Teltonika SWM282 managed switch
    24 × Gigabit PoE+
    300 W shared PoE budget
    4 × SFP uplinks
    2 years RMS Management

    Why choose SWM282?

    Power and manage devices

    Up to 30 W per PoE+ port, remote port control and ping-based PoE restart support device maintenance.

    Control network traffic

    VLANs, LACP, loop protection and static or dynamic routing help organise business and industrial networks.

    Order code SWM282000200: standard package without power cord. PROFINET is disabled by default; choose a dedicated order variant for PROFINET Class B conformance.

    Properties

    Ports & PoE

    Ethernet 24 × 10/100/1000 Mbps RJ45; all 24 ports support PoE+.
    Fibre uplinks 4 × SFP slots; transceivers sold separately.
    PoE output Ports 1–24: IEEE 802.3af/at, Alternative A; up to 30 W per port and 300 W total at PSE.
    Switching performance 56 Gbps non-blocking bandwidth; 83.33 Mpps forwarding rate.

    Network & management

    L2 features 802.1Q VLAN, STP/RSTP, MRP, LACP and IGMP snooping.
    Routing Static IPv4/IPv6; BGP, OSPF v2, RIP v1/v2 and EIGRP.
    Management SwmOS WebUI, SSH, SNMP v2/v3, FOTA and RMS; two years of RMS Management included.
    Security & diagnostics 802.1X, RADIUS/TACACS+, MAC filtering, port isolation, cable diagnostics and PoE restart.

    Hardware & power

    Processor & memory Realtek 500 MHz; 128 MB DDR3 RAM and 16 MB flash.
    Packet handling 512 KB buffer, 8K MAC entries and jumbo frames up to 10,000 bytes.
    AC power 100–240 V AC, 50/60 Hz, C14 inlet. Built-in power supply; power cord not included.
    Consumption & cooling Idle 9 W; maximum 330 W including PoE. Two internal fans; side-to-back airflow.

    Housing & installation

    Device 483 × 44 × 234 mm; aluminium housing, IP30.
    Environment 0 to +50 °C; 10–90% non-condensing humidity.
    Mounting 19-inch rack installation with integrated mounting brackets.
    Shipping package 516 × 320 × 76 mm; approximately 2,249 g.
    SWM282 Ethernet and SFP ports
    SWM282 power input and fans

    Set of equipment

    • SWM282 managed switch
    • 4 rack-mounting screws (packages from September 2026)
    • Quick Start Guide
    • Packaging box

    Power cord and SFP transceivers are sold separately. The combined PoE load must stay within 300 W; 30 W cannot be supplied to all 24 ports simultaneously.

    Teltonika SWM282 perspective view

    Documentation

    Frequently asked questions

    Do all 24 Ethernet ports provide PoE+?

    Yes. Ports 1–24 support up to 30 W each, subject to the combined 300 W PoE power budget.

    Is the power cord included?

    No. The SWM282000200 standard package has a built-in power supply but no AC power cord.

    Is PROFINET Class B included?

    This is the standard variant with PROFINET disabled by default. SWM282000201 is the separate PROFINET Class B order variant.

    Is remote management included?

    Teltonika includes two years of RMS Management. The switch also supports local WebUI, SSH and SNMP management.