• Teltonika SWM280 – 24-Port Managed PoE+ Switch

    Code: SWM280000200

    L2 managed switch with L3 features, 24 Gigabit Ethernet ports, 12 PoE+ outputs and four SFP slots. Total PoE budget: 300 W.

    Standard package SWM280000200 without power cord. Includes two years of RMS Management; PROFINET Class B requires a separate order variant.

  • TELTONIKA SWM280

    24-port networking with 300 W PoE+

    Connect and power access points, cameras and other PoE devices, with managed Gigabit ports and fibre uplinks.

    Teltonika SWM280 managed switch
    24 × Gigabit Ethernet
    12 × PoE+ · 300 W total
    4 × SFP uplinks
    2 years RMS Management

    Why choose SWM280?

    Power and manage devices

    Up to 30 W per PoE+ port, remote port control and ping-based PoE restart support device maintenance.

    Control network traffic

    VLANs, LACP, loop protection and static or dynamic routing help organise business and industrial networks.

    Order code SWM280000200: standard package without power cord. PROFINET is disabled by default; choose a dedicated order variant for PROFINET Class B conformance.

    Properties

    Ports & PoE

    Ethernet 24 × 10/100/1000 Mbps RJ45: 12 PoE+ and 12 non-PoE ports.
    Fibre uplinks 4 × SFP slots; transceivers sold separately.
    PoE output Ports 1–12: IEEE 802.3af/at, Alternative A; up to 30 W per port and 300 W total at PSE.
    Switching performance 56 Gbps non-blocking bandwidth; 83.33 Mpps forwarding rate.

    Network & management

    L2 features 802.1Q VLAN, STP/RSTP, MRP, LACP and IGMP snooping.
    Routing Static IPv4/IPv6; BGP, OSPF v2, RIP v1/v2 and EIGRP.
    Management SwmOS WebUI, SSH, SNMP v2/v3, FOTA and RMS; two years of RMS Management included.
    Security & diagnostics 802.1X, RADIUS/TACACS+, MAC filtering, port isolation, cable diagnostics and PoE restart.

    Hardware & power

    Processor & memory Realtek 500 MHz; 128 MB DDR3 RAM and 16 MB flash.
    Packet handling 512 KB buffer, 8K MAC entries and jumbo frames up to 10,000 bytes.
    AC power 100–240 V AC, 50/60 Hz, C14 inlet. Built-in power supply; power cord not included.
    Consumption & cooling Idle 7.5 W; maximum 325 W including PoE. Two internal fans; side-to-back airflow.

    Housing & installation

    Device 483 × 44 × 234 mm; 1,842 g; aluminium housing, IP30.
    Environment 0 to +50 °C; 10–90% non-condensing humidity.
    Mounting Rack installation.
    Shipping package 516 × 320 × 76 mm; 2,242 g.
    SWM280 Ethernet and SFP ports
    SWM280 power input and fans

    Set of equipment

    • SWM280 managed switch
    • 4 rack-mounting screws (packages from September 2026)
    • Quick Start Guide
    • Packaging box

    Power cord and SFP transceivers are sold separately. Match the combined PoE load to the 300 W budget; 30 W per port cannot be supplied on all 12 ports at once.

    Teltonika SWM280 perspective view

    Documentation

    Frequently asked questions

    Do all 24 Ethernet ports provide PoE?

    No. Ports 1–12 provide PoE+; the other 12 Gigabit ports carry data only.

    Is the power cord included?

    No. The SWM280000200 standard package has a built-in power supply but no AC power cord.

    Is PROFINET Class B included?

    This is the standard variant with PROFINET disabled by default. SWM280000201 is the separate PROFINET Class B order variant.

    Is remote management included?

    Teltonika includes two years of RMS Management. The switch also supports local WebUI, SSH and SNMP management.