• TSW304 TELTONIKA DIN RAIL ETHERNET SWITCH

    Code: TSW304000010
    Barcode: 4779051840144

    Compact unmanaged industrial switch with 4 Gigabit Ethernet ports, an aluminium housing and integrated DIN rail mounting. DC/AC power input and passive PoE input on ETH1.

  • TELTONIKA TSW304

    Gigabit connectivity in a compact format

    Add four Gigabit Ethernet connections to a compact control cabinet with a slim, 25 mm-high aluminium switch and integrated DIN rail mounting.

    Teltonika TSW304
    4 × Gigabit Ethernet
    102 × 25 × 81.5 mm
    DIN rail mounting
    DC / AC power input

    Why TSW304?

    Fits where space is limited

    The compact aluminium housing and integrated DIN rail bracket simplify installation in industrial cabinets.

    Plug-and-play networking

    Four 10/100/1000 Mbps ports support auto MDI/MDIX. Connect the power supply and network cables without software configuration.

    TSW304 is an unmanaged switch without PoE output. Its passive PoE input on ETH1 can power the switch itself; it is not compatible with IEEE 802.3af/at/bt PoE supplies.

    Properties

    Network & performance

    Ethernet 4 × RJ45, 10/100/1000 Mbps with auto MDI/MDIX.
    Switching 8 Gbps non-blocking bandwidth; 128 KB packet buffer; 2K MAC entries.
    Frames & standards Jumbo frames up to 9216 bytes; IEEE 802.3i/u/ab/x/az.
    Version TSW304000010 standard version. PROFINET Class A conformance is available with a separate ordering code.

    Power & installation

    Power socket 2-pin industrial socket: 9–57 V DC according to the current Quick Start Guide; 9–40 V AC is also supported.
    Passive PoE input ETH1 only, Mode B, 9–30 V DC. Not compatible with IEEE 802.3af/at/bt; no PoE output.
    Power consumption Below 5 W according to the current Quick Start Guide.
    Housing & mounting Anodised aluminium, IP30; integrated DIN rail bracket. Wall or flat-surface mounting requires an additional kit.
    Environment −40 to +75 °C; 5–95% relative humidity, non-condensing.
    Device size & weight 102 × 25 × 81.5 mm (W × H × D); 210 g.
    TSW304 Front panel
    Front panel
    TSW304 Back panel
    Back panel

    Set of equipment

    • TSW304 Ethernet switch — TSW304000010
    • Quick Start Guide (QSG)
    • Packaging box

    Standard package without a power supply. DIN rail mounting is integrated; additional wall or surface mounting accessories are ordered separately.

    TSW304 DIN rail

    Documentation

    Frequently asked questions

    Does TSW304 supply PoE power to connected devices?

    No. Passive PoE on ETH1 is an input for powering the switch itself, not an output for cameras or access points.

    Does it need software configuration?

    No. TSW304 is an unmanaged plug-and-play switch.

    Is a power supply included?

    No. Ordering code TSW304000010 is the standard package without a power supply.

    Is a separate DIN rail adapter required?

    No. The DIN rail bracket is integrated. Wall or flat-surface mounting requires a separate kit.