• TSW202 TELTONIKA MANAGED PoE+ ETHERNET SWITCH

    Code: TSW202000000
    Barcode: 4779051840281

    Managed industrial switch with 8 Gigabit PoE+ ports, 2 SFP slots and integrated DIN rail mounting. Up to 30 W per PoE+ port and a 240 W total PoE budget.

  • TELTONIKA TSW202

    Managed networking and PoE+ in one device

    Connect and power industrial Ethernet devices with eight Gigabit PoE+ ports, two SFP uplinks and flexible network management.

    Teltonika TSW202
    8 × Gigabit PoE+
    2 × SFP slots
    Up to 240 W PoE
    Integrated DIN rail mount

    Why TSW202?

    Power and data over one cable

    IEEE 802.3af/at PoE+ delivers up to 30 W per port to compatible cameras, access points and other powered devices.

    Control your industrial network

    Configure VLANs, QoS, port isolation and redundancy through TSWOS. EtherNet/IP, SNMP and remote management support industrial integration.

    This listing is for TSW202000000, supplied without a power supply. PROFINET is disabled by default on this ordering code; the PROFINET Class B variant has a different ordering code.

    Properties

    Network & switching

    Interfaces8 × RJ45, 10/100/1000 Mbps with auto MDI/MDIX; 2 × SFP slots.
    Performance20 Gbps non-blocking bandwidth; 14.88 Mpps forwarding; 512 KB packet buffer; 8K MAC entries.
    FramesJumbo frames up to 10,000 bytes.
    Segmentation & redundancyIEEE 802.1Q VLAN, 802.1p QoS, port isolation, STP/RSTP, MRP and LACP.

    Management & integration

    ManagementTSWOS, WebUI over HTTP/HTTPS, SSH, SNMP v2/v3, FOTA and Teltonika RMS.
    Industrial protocolsEtherNet/IP; PROFINET disabled by default for TSW202000000.
    Security & diagnosticsIEEE 802.1x, RADIUS/TACACS+, MAC filtering, port mirroring and cable diagnostics.
    Network servicesDHCP server/client, IGMP snooping, static IPv4/IPv6 routing and PoE port control.

    Power & installation

    Power input9–57 V DC via a 2-pin industrial socket; 44–57 V DC required for PoE output.
    PoE+ outputIEEE 802.3af/at on ports 1–8; up to 30 W per port, 240 W total. Requires a suitably rated power supply.
    ConsumptionBelow 3 W idle; up to 8 W without PoE loads and 248 W with maximum PoE load.
    Housing & mountingAnodised aluminium, IP30; integrated DIN rail bracket. Wall or flat-surface mounting requires an additional kit.
    Environment−40 to +75 °C; 5–95% relative humidity, non-condensing.
    Device size & weight132 × 44.2 × 122.2 mm (W × H × D); 610 g.
    TSW202 Front panel
    Front panel
    TSW202 Back panel
    Back panel

    Set of equipment

    • TSW202 managed PoE+ switch — TSW202000000
    • Quick Start Guide (QSG)
    • Packaging box

    Power supply and SFP modules are not included. For PoE+, use a 44–57 V DC power supply sized for the switch and the connected devices.

    TSW202 DIN rail

    Documentation

    Frequently asked questions

    Is a power supply included?

    No. TSW202000000 is the standard package without a power supply. SFP modules are also purchased separately.

    Can PoE+ work from a 12 V or 24 V supply?

    No. These voltages can power the switch itself, but PoE output requires 44–57 V DC.

    Is PROFINET enabled on this version?

    PROFINET is disabled by default for ordering code TSW202000000. The PROFINET Class B package without a power supply uses code TSW202000001.

    Can I manage the switch remotely?

    Yes. TSW202 supports WebUI, SSH, SNMP v2/v3 and Teltonika RMS. Available services and functions depend on the installed firmware and configuration.